Discussion:
Is UEFI required for ZFS?
(too old to reply)
Thomas Laus
2016-02-12 15:30:44 UTC
Permalink
I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
would like to use ZFS on this new installation. The Xen Kernel does not have
UEFI support at this time, so I installed FreeBSD CURRENT r295345 in 'legacy
mode'. It takes about 7 minutes to go from the first '|' character to
getting the 'beastie' menu. I changed the BIOS to UEFI and did another
installation. The boot process goes in an instant. Thinking that it may be
an issue with FreeBSD CURRENT, I installed FreeBSD 10.3 BETA 1 in both legacy
and UEFI mode. The results were the same. BIOS Legacy mode with a default
ZFS installation takes nearly 7 minutes to get the Beastie menu. An UEFI
installation with ZFS is instantanious. A default GPT installation of both
CURRENT and FreeBSD 10.3 BETA1, either legacy or UEFI, also gives an instant
bootup.

How can I dig deeper into my problem? I would like to use ZFS with my Xen
Server.

Tom
--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF
Mark Dixon
2016-02-12 18:42:49 UTC
Permalink
Post by Thomas Laus
I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
would like to use ZFS on this new installation. The Xen Kernel does not have
UEFI support at this time, so I installed FreeBSD CURRENT r295345 in 'legacy
mode'. It takes about 7 minutes to go from the first '|' character to
getting the 'beastie' menu. I changed the BIOS to UEFI and did another
installation. The boot process goes in an instant.
Several others have the same problem. See here on the freebsd forums:

http://tinyurl.com/z9oldkc

(URL shortened cos I'm only allowed 80chars per line)

Mark
Kurt Jaeger
2016-02-12 18:56:59 UTC
Permalink
Hi!
Post by Thomas Laus
I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
would like to use ZFS on this new installation. The Xen Kernel does not have
UEFI support at this time, so I installed FreeBSD CURRENT r295345 in 'legacy
mode'. It takes about 7 minutes to go from the first '|' character to
getting the 'beastie' menu.
This is strange. To answer the question in the subject, no, UEFI is
not required for ZFS.
Post by Thomas Laus
How can I dig deeper into my problem? I would like to use ZFS with my Xen
Server.
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
--
***@opsec.eu +49 171 3101372 4 years to go !
Mark Dixon
2016-02-12 21:15:49 UTC
Permalink
Post by Kurt Jaeger
Hi!
Post by Thomas Laus
I have a new Asus H170-Plus-D3 motherboard that will be used for a DOM0 Xen
Server. It uses an Intel i5-6300 processor and a Samsung 840 EVO SSD. I
would like to use ZFS on this new installation. The Xen Kernel does not
have
Post by Kurt Jaeger
Post by Thomas Laus
UEFI support at this time, so I installed FreeBSD CURRENT r295345 in
'legacy
Post by Kurt Jaeger
Post by Thomas Laus
mode'. It takes about 7 minutes to go from the first '|' character to
getting the 'beastie' menu.
This is strange. To answer the question in the subject, no, UEFI is
not required for ZFS.
Post by Thomas Laus
How can I dig deeper into my problem? I would like to use ZFS with my Xen
Server.
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
I have the exact same issue on the forum, so I can:

Dmesg:

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-BETA1 #0 r295289: Fri Feb 5 01:23:50 UTC 2016
***@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (4008.20-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,
SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,
AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended
Features=0x29c6fbf<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,
NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66582614016 (63498 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
random device not loaded; using insecure entropy
ioapic0 <Version 2.0> irqs 0-119 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc6bc0, 0) error 19
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <ALASKA A M I > on motherboard
ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure,
AE_NOT_FOUND (20150515/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150515/psobject-233)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce GTX 970> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xdf080000-0xdf083fff irq 17 at
device 0.1 on pci1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdfb30000-0xdfb3ffff irq 16
at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f
mem 0xdfb48000-0xdfb49fff,0xdfb4c000-0xdfb4c0ff,0xdfb4b000-0xdfb4b7ff irq 23
at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdfa00000-0xdfa07fff irq 16
at device 0.0 on pci3
xhci1: 32 bytes context size, 64-bit DMA
usbus1: waiting for BIOS to give up control
usbus1 on xhci1
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 1.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci5
pci7: <ACPI PCI bus> on pcib7
pci7: <network> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 3.0 on pci5
pci8: <ACPI PCI bus> on pcib8
ahci1: <ASMedia ASM1061 AHCI SATA controller> port
0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem
0xdf700000-0xdf7001ff
irq 17 at device 0.0 on pci8
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 4.0 on pci5
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 5.0 on pci5
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci5
pci11: <ACPI PCI bus> on pcib11
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0>
port 0xc000-0xc01f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 16 at
device 0.0 on pci11
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 9c:5c:8e:71:89:0b
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
pcib12: <ACPI PCI-PCI bridge> irq 17 at device 7.0 on pci5
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib13
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xdf900000-0xdf907fff irq 16
at device 0.0 on pci13
xhci2: 32 bytes context size, 64-bit DMA
usbus2: waiting for BIOS to give up control
usbus2 on xhci2
pcib14: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci14: <ACPI PCI bus> on pcib14
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xdf800000-0xdf807fff irq 18
at device 0.0 on pci14
xhci3: 32 bytes context size, 64-bit DMA
usbus3: waiting for BIOS to give up control
usbus3 on xhci3
pcib15: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci15: <ACPI PCI bus> on pcib15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac1: <Intel (0xa170) HDA Controller> mem
0xdfb40000-0xdfb43fff,0xdfb20000-0xdfb2ffff irq 16 at device 31.3 on pci0
pci0: <network, ethernet> at device 31.6 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x323 offMax=0x57b
hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek (0x0900) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0900) Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek (0x0900) (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26
on hdaa1
pcm5: <Realtek (0x0900) (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek (0x0900) (Onboard Digital)> at nid 17 on hdaa1
pcm7: <Realtek (0x0900) (Rear Digital)> at nid 30 on hdaa1
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b21> at usbus1
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1b21> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen3.1: <0x1b21> at usbus3
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
uhub1: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD5000AAVS-00ZTB0 01.01B01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WMASU0754532
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: Previously was known as ad10
ada1 at ahcich4 bus 0 scbus4 target 0 lun 0
ada1: <ST2000NM0033-9ZM175 SN04> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z1X3S5XD
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: Previously was known as ad12
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <Hitachi HDP725050GLA360 GM4OA52A> ATA8-ACS SATA 2.x device
ada2: Serial Number GEA530RE1L82SA
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
ada2: Previously was known as ad14
ada3 at ahcich6 bus 0 scbus7 target 0 lun 0
ada3: <Samsung SSD 850 PRO 128GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada3: Serial Number S1SMNSAFC21908L
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 122104MB (250069680 512 byte sectors)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad16
ada4 at ahcich7 bus 0 scbus8 target 0 lun 0
ada4: <ST2000VN000-1H3164 SC41> ACS-2 ATA SATA 3.x device
ada4: Serial Number W1H1K74S
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors)
ada4: Previously was known as ad18
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-222AB SB01> Removable CD-ROM SCSI device
cd0: Serial Number R8BZ68DB840995
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 2004099175 Hz quality 1000
ugen3.2: <Metadot - Das Keyboard> at usbus3
ukbd0: <Metadot - Das Keyboard> on usbus3
kbd2 at ukbd0
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus3 usbus0
ugen3.3: <vendor 0x0409> at usbus3
uhub4: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on
usbus3
ugen0.2: <Broadcom Corp> at usbus0
uhub4: 2 ports with 2 removable, self powered
Trying to mount root from zfs:zroot2 []...
uhid0: <Metadot - Das Keyboard Das Keyboard Model S, class 0/0, rev
1.10/1.00, addr 1> on usbus3
igb0: link state changed to UP
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
ugen0.3: <SMSC> at usbus0
uhub5: <SMSC USB2134B, class 9/0, rev 2.10/60.80, addr 2> on usbus0
uhub5: MTT enabled
uhub5: 4 ports with 4 removable, self powered
ugen0.4: <Microsoft> at usbus0
ums0: <Microsoft Microsoft SideWinder X3 Mouse, class 0/0, rev 2.00/4.30,
addr 3> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=26

pciconf;


***@pci0:0:0:0: class=0x060000 card=0x86941043 chip=0x191f8086
rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sky Lake Host Bridge/DRAM Registers'
class = bridge
subclass = HOST-PCI
***@pci0:0:1:0: class=0x060400 card=0x86941043 chip=0x19018086
rev=0x07 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sky Lake PCIe Controller (x16)'
class = bridge
subclass = PCI-PCI
***@pci0:0:20:0: class=0x0c0330 card=0x86941043 chip=0xa12f8086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H USB 3.0 xHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xdfb30000, size 65536, enabled
***@pci0:0:22:0: class=0x078000 card=0x86941043 chip=0xa13a8086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H CSME HECI'
class = simple comms
bar [10] = type Memory, range 64, base 0xdfb4d000, size 4096, enabled
***@pci0:0:23:0: class=0x010601 card=0x86941043 chip=0xa1028086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H SATA controller [AHCI mode]'
class = mass storage
subclass = SATA
bar [10] = type Memory, range 32, base 0xdfb48000, size 8192, enabled
bar [14] = type Memory, range 32, base 0xdfb4c000, size 256, enabled
bar [18] = type I/O Port, range 32, base 0xf050, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf040, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf020, size 32, enabled
bar [24] = type Memory, range 32, base 0xdfb4b000, size 2048, enabled
***@pci0:0:27:0: class=0x060400 card=0x86941043 chip=0xa1678086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:28:0: class=0x060400 card=0x86941043 chip=0xa1108086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:28:2: class=0x060400 card=0x86941043 chip=0xa1128086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:28:4: class=0x060400 card=0x86941043 chip=0xa1148086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:28:6: class=0x060400 card=0x86941043 chip=0xa1168086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:29:0: class=0x060400 card=0x86941043 chip=0xa1188086
rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:31:0: class=0x060100 card=0x86941043 chip=0xa1458086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPC Controller'
class = bridge
subclass = PCI-ISA
***@pci0:0:31:2: class=0x058000 card=0x86941043 chip=0xa1218086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PMC'
class = memory
bar [10] = type Memory, range 32, base 0xdfb44000, size 16384, enabled
***@pci0:0:31:3: class=0x040300 card=0x868f1043 chip=0xa1708086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H HD Audio'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xdfb40000, size 16384, enabled
bar [20] = type Memory, range 64, base 0xdfb20000, size 65536, enabled
***@pci0:0:31:4: class=0x0c0500 card=0x86941043 chip=0xa1238086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H SMBus'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xdfb4a000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0xf000, size 32, enabled
***@pci0:0:31:6: class=0x020000 card=0x86721043 chip=0x15b88086
rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection (2) I219-V'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xdfb00000, size 131072, enabled
***@pci0:1:0:0: class=0x030000 card=0x85081043 chip=0x13c210de
rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GM204 [GeForce GTX 970]'
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xde000000, size 16777216, enabled
bar [14] = type Prefetchable Memory, range 64, base 0xc0000000, size
268435456, enabled
bar [1c] = type Prefetchable Memory, range 64, base 0xd0000000, size
33554432, enabled
bar [24] = type I/O Port, range 32, base 0xe000, size 128, enabled
***@pci0:1:0:1: class=0x040300 card=0x85081043 chip=0x0fbb10de
rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GM204 High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 32, base 0xdf080000, size 16384, enabled
***@pci0:3:0:0: class=0x0c0330 card=0x86751043 chip=0x12421b21
rev=0x00 hdr=0x00
vendor = 'ASMedia Technology Inc.'
device = 'ASM1142 USB 3.1 Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xdfa00000, size 32768, enabled
***@pci0:4:0:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:1:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:2:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:3:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:4:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:5:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:6:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:5:7:0: class=0x060400 card=0x118f1b21 chip=0x11871b21
rev=0x00 hdr=0x01
vendor = 'ASMedia Technology Inc.'
class = bridge
subclass = PCI-PCI
***@pci0:7:0:0: class=0x028000 card=0x86591043 chip=0x43a014e4
rev=0x03 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4360 802.11ac Wireless Network Adapter'
class = network
bar [10] = type Memory, range 64, base 0xdf400000, size 32768, enabled
bar [18] = type Memory, range 64, base 0xdf200000, size 2097152, enabled
***@pci0:8:0:0: class=0x010601 card=0x858d1043 chip=0x06121b21
rev=0x02 hdr=0x00
vendor = 'ASMedia Technology Inc.'
device = 'ASM1062 Serial ATA Controller'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0xd050, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xd040, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xd030, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xd020, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xd000, size 32, enabled
bar [24] = type Memory, range 32, base 0xdf700000, size 512, enabled
***@pci0:11:0:0: class=0x020000 card=0x85f01043 chip=0x15398086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I211 Gigabit Network Connection'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0xdf600000, size 131072, enabled
bar [18] = type I/O Port, range 32, base 0xc000, size 32, enabled
bar [1c] = type Memory, range 32, base 0xdf620000, size 16384, enabled
***@pci0:13:0:0: class=0x0c0330 card=0x86751043 chip=0x12421b21
rev=0x00 hdr=0x00
vendor = 'ASMedia Technology Inc.'
device = 'ASM1142 USB 3.1 Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xdf900000, size 32768, enabled
***@pci0:14:0:0: class=0x0c0330 card=0x86751043 chip=0x12421b21
rev=0x00 hdr=0x00
vendor = 'ASMedia Technology Inc.'
device = 'ASM1142 USB 3.1 Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xdf800000, size 32768, enabled
Konstantin Belousov
2016-02-13 10:09:36 UTC
Permalink
Post by Kurt Jaeger
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
As a blind shot, try to lower the CPU frequency in the BIOS, to 3 or even
to 2 Ghz. If you can try a dos (real dos from MS) on usb stick and see
if it works it could be also telling.

Also, could you obtain verbose dmesg ?
Thomas Laus
2016-02-13 14:56:09 UTC
Permalink
Post by Konstantin Belousov
As a blind shot, try to lower the CPU frequency in the BIOS, to 3 or even
to 2 Ghz. If you can try a dos (real dos from MS) on usb stick and see
if it works it could be also telling.
Also, could you obtain verbose dmesg ?
My dmesg.boot:

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r295345: Sat Feb 6 08:40:13 UTC 2016
***@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.14-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16442499072 (15680 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ee2ef0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150818/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150818/psobject-237)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150818/tbxfload-211)
ACPI Error: 1 table load failures, 7 successful (20150818/tbxfload-235)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7210000-0xf721ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7228000-0xf7229fff,0xf722c000-0xf722c0ff,0xf722b000-0xf722b7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7104000-0xf7104fff,0xf7100000-0xf7103fff irq 19 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 30:5a:3a:07:fa:54
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 29.5 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xf7020000-0xf702007f irq 17 at device 0.0 on pci5
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
xl0: Ethernet address: 00:10:5a:17:bd:ba
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel (0xa170) HDA Controller> mem 0xf7220000-0xf7223fff,0xf7200000-0xf720ffff irq 16 at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0
hdacc1: <Intel (0x2809) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2809) Audio Function Group> at nid 1 on hdacc1
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1DBNSCF333310B
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x1<4K>
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
cd0 at ahcich3 bus 0 scbus1 target 0 lun 0
ses0: SEMB SES Device
cd0: <HL-DT-ST DVD-RAM GH22LS30 1.00> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1596069774 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 24 ports with 24 removable, self powered
re0: link state changed to DOWN
re0: link state changed to UP
xl0: link state changed to DOWN

===============
I booted the computer from a MSDOS 6.22 floppy in my USB floppy drive.
There were no issues and the computer booted as expected. I installed
OpenBSD 5.8 on the hard drive and it also booted normally in less than
30 seconds from the start. My only issue is with FreeBSD in non-UEFI
and ZFS.

Tom
--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF
Thomas Laus
2016-02-13 15:43:14 UTC
Permalink
Post by Konstantin Belousov
Post by Kurt Jaeger
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
As a blind shot, try to lower the CPU frequency in the BIOS, to 3 or even
to 2 Ghz. If you can try a dos (real dos from MS) on usb stick and see
if it works it could be also telling.
Also, could you obtain verbose dmesg ?
I am inclufing the output of pciconf -lvb because it did not make it to
this list.

***@pci0:0:0:0: class=0x060000 card=0x86941043 chip=0x191f8086 rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sky Lake Host Bridge/DRAM Registers'
class = bridge
subclass = HOST-PCI
***@pci0:0:2:0: class=0x030000 card=0x86941043 chip=0x19128086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sky Lake Integrated Graphics'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xf6000000, size 16777216, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0xf000, size 64, enabled
***@pci0:0:20:0: class=0x0c0330 card=0x86941043 chip=0xa12f8086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H USB 3.0 xHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 64, base 0xf7210000, size 65536, enabled
***@pci0:0:22:0: class=0x078000 card=0x86941043 chip=0xa13a8086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H CSME HECI'
class = simple comms
bar [10] = type Memory, range 64, base 0xf722d000, size 4096, enabled
***@pci0:0:23:0: class=0x010601 card=0x86941043 chip=0xa1028086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = SATA
bar [10] = type Memory, range 32, base 0xf7228000, size 8192, enabled
bar [14] = type Memory, range 32, base 0xf722c000, size 256, enabled
bar [18] = type I/O Port, range 32, base 0xf090, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf080, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf060, size 32, enabled
bar [24] = type Memory, range 32, base 0xf722b000, size 2048, enabled
***@pci0:0:28:0: class=0x060400 card=0x86941043 chip=0xa1128086 rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:28:3: class=0x060400 card=0x86941043 chip=0xa1138086 rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:29:0: class=0x060400 card=0x86941043 chip=0xa1188086 rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:29:5: class=0x060400 card=0x86941043 chip=0xa11d8086 rev=0xf1 hdr=0x01
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class = bridge
subclass = PCI-PCI
***@pci0:0:31:0: class=0x060100 card=0x86941043 chip=0xa1448086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPC Controller'
class = bridge
subclass = PCI-ISA
***@pci0:0:31:2: class=0x058000 card=0x86941043 chip=0xa1218086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H PMC'
class = memory
bar [10] = type Memory, range 32, base 0xf7224000, size 16384, enabled
***@pci0:0:31:3: class=0x040300 card=0x86c71043 chip=0xa1708086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H HD Audio'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf7220000, size 16384, enabled
bar [20] = type Memory, range 64, base 0xf7200000, size 65536, enabled
***@pci0:0:31:4: class=0x0c0500 card=0x86941043 chip=0xa1238086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Sunrise Point-H SMBus'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xf722a000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0xf040, size 32, enabled
***@pci0:2:0:0: class=0x020000 card=0x86771043 chip=0x816810ec rev=0x15 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xe000, size 256, enabled
bar [18] = type Memory, range 64, base 0xf7104000, size 4096, enabled
bar [20] = type Memory, range 64, base 0xf7100000, size 16384, enabled
***@pci0:4:0:0: class=0x060400 card=0x84891043 chip=0x10801b21 rev=0x04 hdr=0x01
vendor = 'ASMedia Technology Inc.'
device = 'ASM1083/1085 PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
***@pci0:5:0:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x24 hdr=0x00
vendor = '3Com Corporation'
device = '3c905B 100BaseTX [Cyclone]'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd000, size 128, enabled
bar [14] = type Memory, range 32, base 0xf7020000, size 128, enabled
--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF
Thomas Laus
2016-02-13 17:17:06 UTC
Permalink
Post by Konstantin Belousov
Post by Kurt Jaeger
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
As a blind shot, try to lower the CPU frequency in the BIOS, to 3 or even
to 2 Ghz. If you can try a dos (real dos from MS) on usb stick and see
if it works it could be also telling.
Also, could you obtain verbose dmesg ?
Konstatin:

Here is my verbose dmesg.boot:

Table 'FACP' at 0xbf24f4b8
Table 'APIC' at 0xbf24f5c8
APIC: Found table at 0xbf24f5c8
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
SMP: Added CPU 6 (AP)
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r295345: Sat Feb 6 08:40:13 UTC 2016
***@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
WARNING: WITNESS option enabled, expect reduced performance.
PPIM 0: PA=0xa0000, VA=0xffffffff82610000, size=0x10000, mode=0
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8242b000.
Preloaded /boot/entropy "/boot/entropy" at 0xffffffff8242be48.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff8242be98.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff8242c680.
Calibrating TSC clock ... TSC clock: 3192150826 Hz
CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.15-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
Secondary Processor Controls=0x1f7cff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,VMCS,XSAVES>
Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
Entry Controls=0xda0400
EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
TSC: P-state invariant, performance statistics
Data TLB: 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 128 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000098fff, 561152 bytes (137 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002470000 - 0x00000000b8951fff, 3058573312 bytes (746722 pages)
0x00000000b897d000 - 0x00000000b8a21fff, 675840 bytes (165 pages)
0x00000000b90a3000 - 0x00000000bdb1bfff, 78090240 bytes (19065 pages)
0x00000000bffff000 - 0x00000000bfffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000041f619fff, 13411393536 bytes (3274266 pages)
avail memory = 16442499072 (15680 MB)
Table 'FACP' at 0xbf24f4b8
Table 'APIC' at 0xbf24f5c8
Table 'FPDT' at 0xbf24f650
Table 'FIDT' at 0xbf24f698
Table 'MCFG' at 0xbf24f738
Table 'HPET' at 0xbf24f778
Table 'SSDT' at 0xbf24f7b0
Table 'LPIT' at 0xbf24fb20
Table 'SSDT' at 0xbf24fbb8
Table 'SSDT' at 0xbf24fe00
Table 'SSDT' at 0xbf2529b0
Table 'DBGP' at 0xbf2536a8
Table 'DBG2' at 0xbf2536e0
Table 'SSDT' at 0xbf253738
Table 'SSDT' at 0xbf253e40
Table 'UEFI' at 0xbf259130
Table 'SSDT' at 0xbf259178
Table 'ASF!' at 0xbf25a0d0
Table 'DMAR' at 0xbf25a028
DMAR: Found table at 0xbf25a028
x2APIC available but disabled by DMAR table
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe03dabd0000
x86bios: EBDA 0x09c000-0x09ffff at 0xfffff8000009c000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
lapic0: CMCI unmasked
random: read 4096 bytes from preloaded cache
random: unblocking device.
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BF22E0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BF24F4B8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BF22E1F8 0212BB (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000BFA21F80 000040
ACPI: APIC 0x00000000BF24F5C8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BF24F650 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000BF24F698 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BF24F738 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BF24F778 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x00000000BF24F7B0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x00000000BF24FB20 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000BF24FBB8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x00000000BF24FE00 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x00000000BF2529B0 000CF3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x00000000BF2536A8 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x00000000BF2536E0 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000BF253738 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x00000000BF253E40 0052EA (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000BF259130 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000BF259178 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: ASF! 0x00000000BF25A0D0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 0x00000000BF25A028 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: ver 0x20 maxredir 0x77
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-119 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: entropy device external interface
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
netmap: loaded module
null: <full device, null device, zero device>
crypto: <crypto core>
module_register_init: MOD_LOAD (vesa, 0xffffffff80ee2ef0, 0) error 19
io: <I/O>
VMBUS: load
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
hpt27xx: RocketRAID 27xx controller driver v1.2.7
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hptnr: R750/DC7280 controller driver v1.1.4
random: harvesting attach, 8 bytes (4 bits) from ram0
vtvga0: <VT VGA driver> on motherboard
random: harvesting attach, 8 bytes (4 bits) from vtvga0
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
acpi0: <ALASKA A M I > on motherboard
ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150818/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150818/psobject-237)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150818/tbxfload-211)
ACPI Error: 1 table load failures, 7 successful (20150818/tbxfload-235)
PCIe: Memory Mapped configuration base @ 0xf8000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 24 blocks of module-level executable AML code
acpi0: Power Button (fixed)
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource2
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource3
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource4
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource5
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource6
cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8000572B000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005A7F000 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005A7E800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80005723000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
random: harvesting attach, 8 bytes (4 bits) from cpu1
cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2
cpu2: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu2
cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu3
ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored
ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored
ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored
ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0), MSI
hpet0: t2: irqs 0x00f00800 (0), MSI
hpet0: t3: irqs 0x00f01000 (0), MSI
hpet0: t4: irqs 0x00000000 (0), MSI
hpet0: t5: irqs 0x00000000 (0), MSI
hpet0: t6: irqs 0x00000000 (0), MSI
hpet0: t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 24000000 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
msi: routing MSI-X IRQ 263 to local APIC 0 vector 56
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
random: harvesting attach, 8 bytes (4 bits) from hpet0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
random: harvesting attach, 8 bytes (4 bits) from atrtc0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
random: harvesting attach, 8 bytes (4 bits) from attimer0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link0
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link1
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link2
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link3
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link4
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link5
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link6
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link7
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0x3e
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc3000000-0xf7ffffff
pcib0: decoding 3 range 0xfd000000-0xfe7fffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x191f, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1912, revid=0x06
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xf6000000, size 24, enabled
pcib0: allocated type 3 (0xf6000000-0xf6ffffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa12f, revid=0x31
domain=0, bus=0, slot=20, func=0
class=0c-03-30, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xf7210000, size 16, enabled
pcib0: allocated type 3 (0xf7210000-0xf721ffff) for rid 10 of pci0:0:20:0
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa13a, revid=0x31
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf722d000, size 12, memory disabled
pcib0: allocated type 3 (0xf722d000-0xf722dfff) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa102, revid=0x31
domain=0, bus=0, slot=23, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xf7228000, size 13, enabled
pcib0: allocated type 3 (0xf7228000-0xf7229fff) for rid 10 of pci0:0:23:0
map[14]: type Memory, range 32, base 0xf722c000, size 8, enabled
pcib0: allocated type 3 (0xf722c000-0xf722c0ff) for rid 14 of pci0:0:23:0
map[18]: type I/O Port, range 32, base 0xf090, size 3, enabled
pcib0: allocated type 4 (0xf090-0xf097) for rid 18 of pci0:0:23:0
map[1c]: type I/O Port, range 32, base 0xf080, size 2, enabled
pcib0: allocated type 4 (0xf080-0xf083) for rid 1c of pci0:0:23:0
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:23:0
map[24]: type Memory, range 32, base 0xf722b000, size 11, enabled
pcib0: allocated type 3 (0xf722b000-0xf722b7ff) for rid 24 of pci0:0:23:0
pcib0: matched entry for 0.23.INTA
pcib0: slot 23 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa112, revid=0xf1
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=1, subbus=1
found-> vendor=0x8086, dev=0xa113, revid=0xf1
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=15
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
secbus=2, subbus=2
found-> vendor=0x8086, dev=0xa118, revid=0xf1
domain=0, bus=0, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
secbus=3, subbus=3
found-> vendor=0x8086, dev=0xa11d, revid=0xf1
domain=0, bus=0, slot=29, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
secbus=4, subbus=5
found-> vendor=0x8086, dev=0xa144, revid=0x31
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xa121, revid=0x31
domain=0, bus=0, slot=31, func=2
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0xf7224000, size 14, enabled
pcib0: allocated type 3 (0xf7224000-0xf7227fff) for rid 10 of pci0:0:31:2
found-> vendor=0x8086, dev=0xa170, revid=0x31
domain=0, bus=0, slot=31, func=3
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf7220000, size 14, enabled
pcib0: allocated type 3 (0xf7220000-0xf7223fff) for rid 10 of pci0:0:31:3
map[20]: type Memory, range 64, base 0xf7200000, size 16, enabled
pcib0: allocated type 3 (0xf7200000-0xf720ffff) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa123, revid=0x31
domain=0, bus=0, slot=31, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 64, base 0xf722a000, size 8, enabled
pcib0: allocated type 3 (0xf722a000-0xf722a0ff) for rid 10 of pci0:0:31:4
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:4
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
random: harvesting attach, 8 bytes (4 bits) from hostb0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
random: harvesting attach, 8 bytes (4 bits) from vgapci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7210000-0xf721ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
xhci0: using IRQ 264 for MSI
xhci0: MSI enabled
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
xhci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
random: harvesting attach, 8 bytes (4 bits) from xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7228000-0xf7229fff,0xf722c000-0xf722c0ff,0xf722b000-0xf722b7ff irq 16 at device 23.0 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
ahci0: using IRQ 265 for MSI
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF AL CLO 6Gbps PMD SSC PSC 32cmd EM 4ports
ahci0: Caps2: DESO SADM SDS APST
ahcich0: not probed (disabled)
ahcich1: not probed (disabled)
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich2
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich3
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich4
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps:
random: harvesting attach, 8 bytes (4 bits) from ahcich5
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
random: harvesting attach, 8 bytes (4 bits) from ahciem0
random: harvesting attach, 8 bytes (4 bits) from ahci0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
random: harvesting attach, 8 bytes (4 bits) from pci1
random: harvesting attach, 8 bytes (4 bits) from pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib2
pcib0: allocated type 3 (0xf7100000-0xf71fffff) for rid 20 of pcib2
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xf7100000-0xf71fffff
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x15
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled
pcib2: allocated I/O port range (0xe000-0xe0ff) for rid 10 of pci0:2:0:0
map[18]: type Memory, range 64, base 0xf7104000, size 12, enabled
pcib2: allocated memory range (0xf7104000-0xf7104fff) for rid 18 of pci0:2:0:0
map[20]: type Memory, range 64, base 0xf7100000, size 14, enabled
pcib2: allocated memory range (0xf7100000-0xf7103fff) for rid 20 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7104000-0xf7104fff,0xf7100000-0xf7103fff irq 19 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 4
re0: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 266 to local APIC 0 vector 61
re0: using IRQ 266 for MSI-X
re0: Using 1 MSI-X message
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0000, rev. 0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
random: harvesting attach, 8 bytes (4 bits) from rgephy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
re0: Using defaults for TSO: 65518/35/2048
re0: bpf attached
re0: Ethernet address: 30:5a:3a:07:fa:54
re0: netmap queues/slots: TX 1/256, RX 1/256
random: harvesting attach, 8 bytes (4 bits) from re0
random: harvesting attach, 8 bytes (4 bits) from pci2
random: harvesting attach, 8 bytes (4 bits) from pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
random: harvesting attach, 8 bytes (4 bits) from pci3
random: harvesting attach, 8 bytes (4 bits) from pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 29.5 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib4
pcib0: allocated type 3 (0xf7000000-0xf70fffff) for rid 20 of pcib4
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 5
pcib4: I/O decode 0xd000-0xdfff
pcib4: memory decode 0xf7000000-0xf70fffff
pci4: <ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
found-> vendor=0x1b21, dev=0x1080, revid=0x04
domain=0, bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
secbus=5, subbus=5
pcib4: allocated bus range (5-5) for rid 0 of pci0:4:0:0
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4
pcib4: allocated I/O port range (0xd000-0xdfff) for rid 1c of pcib5
pcib4: allocated memory range (0xf7000000-0xf70fffff) for rid 20 of pcib5
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xd000-0xdfff
pcib5: memory decode 0xf7000000-0xf70fffff
pcib5: could not get PCI interrupt routing table for \134_SB_.PCI0.RP14.D048 - AE_NOT_FOUND
pci5: <ACPI PCI bus> on pcib5
pcib5: allocated bus range (5-5) for rid 0 of pci5
pci5: domain=0, physical bus=5
found-> vendor=0x10b7, dev=0x9055, revid=0x24
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd000, size 7, enabled
pcib5: allocated I/O port range (0xd000-0xd07f) for rid 10 of pci0:5:0:0
map[14]: type Memory, range 32, base 0xf7020000, size 7, enabled
pcib5: allocated memory range (0xf7020000-0xf702007f) for rid 14 of pci0:5:0:0
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
pcib5: slot 0 INTA is routed to irq 17
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xf7020000-0xf702007f irq 17 at device 0.0 on pci5
xl0: using memory mapped I/O
xl0: No auxiliary remote wakeup connector!
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus1
xlphy0: OUI 0x000000, model 0x0000, rev. 0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
random: harvesting attach, 8 bytes (4 bits) from xlphy0
random: harvesting attach, 8 bytes (4 bits) from miibus1
xl0: bpf attached
xl0: Ethernet address: 00:10:5a:17:bd:ba
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 62
random: harvesting attach, 8 bytes (4 bits) from xl0
random: harvesting attach, 8 bytes (4 bits) from pci5
random: harvesting attach, 8 bytes (4 bits) from pcib5
random: harvesting attach, 8 bytes (4 bits) from pci4
random: harvesting attach, 8 bytes (4 bits) from pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
random: harvesting attach, 8 bytes (4 bits) from isa0
random: harvesting attach, 8 bytes (4 bits) from isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel (0xa170) HDA Controller> mem 0xf7220000-0xf7223fff,0xf7200000-0xf720ffff irq 16 at device 31.3 on pci0
hdac0: PCI card vendor: 0x1043, device: 0x86c7
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 63
hdac0: using IRQ 267 for MSI
hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
random: harvesting attach, 8 bytes (4 bits) from hdac0
pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
random: harvesting attach, 8 bytes (4 bits) from pci0
random: harvesting attach, 8 bytes (4 bits) from pcib0
acpi_button0: <Sleep Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button0
acpi_button1: <Power Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button1
acpi_tz0: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz0
acpi_tz1: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 64
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 65
atkbd0: [GIANT-LOCKED]
random: harvesting attach, 8 bytes (4 bits) from atkbd0
psm0: unable to allocate IRQ
random: harvesting attach, 8 bytes (4 bits) from atkbdc0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 14
psm: status 00 00 28
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 66
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
random: harvesting attach, 8 bytes (4 bits) from psm0
random: harvesting attach, 8 bytes (4 bits) from psmcpnp0
random: harvesting attach, 8 bytes (4 bits) from fpupnp0
ACPI: Enabled 5 GPEs in block 00 to 7F
random: harvesting attach, 8 bytes (4 bits) from acpi0
random: harvesting attach, 8 bytes (4 bits) from apic0
acpi0: wakeup code va 0xfffffe046066e000 pa 0x90000
random: harvesting attach, 8 bytes (4 bits) from nexus0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0 failed to probe on isa0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
uart1 failed to probe at port 0x2f8 irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
random: harvesting attach, 8 bytes (4 bits) from acpi_perf2
random: harvesting attach, 8 bytes (4 bits) from acpi_perf3
est0: <Enhanced SpeedStep Frequency Control> on cpu0
random: harvesting attach, 8 bytes (4 bits) from cpufreq0
random: harvesting attach, 8 bytes (4 bits) from est0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
random: harvesting attach, 8 bytes (4 bits) from cpufreq1
random: harvesting attach, 8 bytes (4 bits) from est1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
random: harvesting attach, 8 bytes (4 bits) from cpufreq2
random: harvesting attach, 8 bytes (4 bits) from est2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
random: harvesting attach, 8 bytes (4 bits) from cpufreq3
random: harvesting attach, 8 bytes (4 bits) from est3
Device configuration finished.
usbus0: 5.0Gbps Super Speed USB v3.0
procfs registered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lapic: Divisor 2, Frequency 12000568 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
IPsec: Initialized Security Association Processing.
lo0: bpf attached
hpt27xx: no controller detected.
hptrr: no controller detected.
hptnr: no controller detected.
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x104386c7
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 90460130 3 0 SPDIF-out Fixed Digital Internal Unknown 1
hdaa0: 18 40330000 0 0 CD None ATAPI 0x00 Unknown 0
hdaa0: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 24 01a19040 4 0 Mic Jack 1/8 Rear Pink 0
hdaa0: 25 02a19050 5 0 Mic Jack 1/8 Front Pink 0
hdaa0: 26 0181304f 4 15 Line-in Jack 1/8 Rear Blue 0
hdaa0: 27 02214020 2 0 Headphones Jack 1/8 Front Green 0
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4046c629 2 9 SPDIF-out None Digital 0x00 Res.C 6
hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 90460130 3 0 SPDIF-out Fixed Digital Internal Unknown 1
hdaa0: 18 40330000 0 0 CD None ATAPI 0x00 Unknown 0 DISA
hdaa0: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 24 01a19040 4 0 Mic Jack 1/8 Rear Pink 0
hdaa0: 25 02a19050 5 0 Mic Jack 1/8 Front Pink 0
hdaa0: 26 0181304f 4 15 Line-in Jack 1/8 Rear Blue 0
hdaa0: 27 02214020 2 0 Headphones Jack 1/8 Front Green 0
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 5 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=20 seq=0
hdaa0: Association 1 (2) out:
hdaa0: Pin nid=27 seq=0
hdaa0: Association 2 (3) out:
hdaa0: Pin nid=17 seq=0
hdaa0: Association 3 (4) in:
hdaa0: Pin nid=24 seq=0
hdaa0: Pin nid=26 seq=15
hdaa0: Association 4 (5) in:
hdaa0: Pin nid=25 seq=0
hdaa0: Tracing association 0 (1)
hdaa0: Pin 20 traced to DAC 2
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0: Pin 27 traced to DAC 3
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0: Pin 17 traced to DAC 16
hdaa0: Association 2 (3) trace succeeded
hdaa0: Tracing association 3 (4)
hdaa0: Pin 24 traced to ADC 8
hdaa0: Pin 26 traced to ADC 8
hdaa0: Association 3 (4) trace succeeded
hdaa0: Tracing association 4 (5)
hdaa0: Pin 25 traced to ADC 9
hdaa0: Association 4 (5) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional DAC for association 1 (2)
hdaa0: Looking for additional DAC for association 2 (3)
hdaa0: Looking for additional ADC for association 3 (4)
hdaa0: Looking for additional ADC for association 4 (5)
hdaa0: Tracing input monitor
hdaa0: Tracing nid 11 to out
hdaa0: nid 11 is input monitor
hdaa0: Tracing nid 34 to out
hdaa0: Tracing nid 35 to out
hdaa0: Tracing other input monitors
hdaa0: Tracing nid 24 to out
hdaa0: Tracing nid 25 to out
hdaa0: Tracing nid 26 to out
hdaa0: Tracing beeper
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: nid=20 [pin: Line-out (Green Jack)]
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Record:
pcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm0: ADC: 8
pcm0:
pcm0: nid=8 [audio input]
pcm0: + <- nid=35 [audio mixer] [src: speaker, line, mic, mix]
pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Input Mix:
pcm0:
pcm0: nid=11 [audio mixer]
pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0:
pcm0: Master Volume (OSS: vol): -64/0dB
pcm0: +- ctl 1 (nid 2 out): -64/0dB (65 steps)
pcm0: +- ctl 17 (nid 12 in 0): mute
pcm0: +- ctl 18 (nid 12 in 1): mute
pcm0: +- ctl 25 (nid 20 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm): -64/0dB
pcm0: +- ctl 1 (nid 2 out): -64/0dB (65 steps)
pcm0: +- ctl 17 (nid 12 in 0): mute
pcm0:
pcm0: Microphone Volume (OSS: mic): 0/30dB
pcm0: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 30 (nid 24 out): 0/30dB (4 steps)
pcm0: +- ctl 49 (nid 35 in 0): mute
pcm0:
pcm0: Line-in Volume (OSS: line): 0/30dB
pcm0: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm0: +- ctl 34 (nid 26 out): 0/30dB (4 steps)
pcm0: +- ctl 51 (nid 35 in 2): mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB
pcm0: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm0: +- ctl 54 (nid 35 in 5): mute
pcm0:
pcm0: Recording Level (OSS: rec): -16/30dB
pcm0: +- ctl 5 (nid 8 in 0): -16/30dB (47 steps) + mute
pcm0: +- ctl 49 (nid 35 in 0): mute
pcm0: +- ctl 51 (nid 35 in 2): mute
pcm0: +- ctl 54 (nid 35 in 5): mute
pcm0: +- ctl 59 (nid 35 in 10): mute
pcm0:
pcm0: Input Mix Level (OSS: mix): -34/12dB
pcm0: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm0: +- ctl 12 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm0: +- ctl 18 (nid 12 in 1): mute
pcm0: +- ctl 59 (nid 35 in 10): mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): 0/0dB
pcm0: +- ctl 18 (nid 12 in 1): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Playback channel set is: Front Left, Front Right,
pcm0: Playback channel matrix is: 2.0 (disconnected)
pcm0: Recording channel set is: Front Left, Front Right,
pcm0: Recording channel matrix is: 2.0 (disconnected)
random: harvesting attach, 8 bytes (4 bits) from pcm0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm1: Playback:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: DAC: 3
pcm1:
pcm1: nid=27 [pin: Headphones (Green Jack)]
pcm1: + <- nid=13 [audio mixer] [src: pcm, mix]
pcm1: + <- nid=3 [audio output] [src: pcm]
pcm1: + <- nid=11 [audio mixer] [src: mix]
pcm1:
pcm1: Record:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: ADC: 9
pcm1:
pcm1: nid=9 [audio input]
pcm1: + <- nid=34 [audio mixer] [src: speaker, monitor]
pcm1: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor]
pcm1: + <- nid=29 [beep widget] [src: speaker]
pcm1:
pcm1: Master Volume (OSS: vol): -64/0dB
pcm1: +- ctl 2 (nid 3 out): -64/0dB (65 steps)
pcm1: +- ctl 19 (nid 13 in 0): mute
pcm1: +- ctl 20 (nid 13 in 1): mute
pcm1: +- ctl 35 (nid 27 in ): mute
pcm1:
pcm1: PCM Volume (OSS: pcm): -64/0dB
pcm1: +- ctl 2 (nid 3 out): -64/0dB (65 steps)
pcm1: +- ctl 19 (nid 13 in 0): mute
pcm1:
pcm1: Microphone2 Volume (OSS: monitor): 0/30dB
pcm1: +- ctl 32 (nid 25 out): 0/30dB (4 steps)
pcm1: +- ctl 38 (nid 34 in 1): mute
pcm1:
pcm1: Speaker/Beep Volume (OSS: speaker)
pcm1: +- ctl 42 (nid 34 in 5): mute
pcm1:
pcm1: Recording Level (OSS: rec): -16/30dB
pcm1: +- ctl 6 (nid 9 in 0): -16/30dB (47 steps) + mute
pcm1: +- ctl 32 (nid 25 out): 0/30dB (4 steps)
pcm1: +- ctl 38 (nid 34 in 1): mute
pcm1: +- ctl 42 (nid 34 in 5): mute
pcm1:
pcm1: Input Mix Level (OSS: mix)
pcm1: +- ctl 20 (nid 13 in 1): mute
pcm1:
pcm1: Input Monitoring Level (OSS: igain): 0/0dB
pcm1: +- ctl 20 (nid 13 in 1): mute
pcm1:
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "rec":
pcm1: Mixer "igain":
pcm1: Mixer "ogain":
pcm1: Mixer "monitor":
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (disconnected)
pcm1: Recording channel set is: Front Left, Front Right,
pcm1: Recording channel matrix is: 2.0 (disconnected)
random: harvesting attach, 8 bytes (4 bits) from pcm1
pcm2: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa0
pcm2: Playback:
pcm2: Stream cap: 0x00000005 AC3 PCM
pcm2: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm2: DAC: 16
pcm2:
pcm2: nid=17 [pin: SPDIF-out (Fixed)]
pcm2: + <- nid=16 [audio output] [src: pcm]
pcm2:
pcm2: Mixer "vol" -> "none": child=0x00000010
pcm2: Mixer "pcm": parent="vol"
pcm2: Soft PCM mixer ENABLED
pcm2: Playback channel set is: Front Left, Front Right,
pcm2: Playback channel matrix is: 2.0 (unknown)
random: harvesting attach, 8 bytes (4 bits) from pcm2
random: harvesting attach, 8 bytes (4 bits) from hdaa0
random: harvesting attach, 8 bytes (4 bits) from hdacc0
hdacc1: <Intel (0x2809) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2809) Audio Function Group> at nid 1 on hdacc1
hdaa1: Subsystem ID: 0x80860101
hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa1: Original pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 3 58560010 1 0 Digital-out None Digital 0x18 Unknown 0
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 3 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa1: Tracing input monitor
hdaa1: Tracing other input monitors
hdaa1: Tracing beeper
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
random: harvesting attach, 8 bytes (4 bits) from hdaa1
random: harvesting attach, 8 bytes (4 bits) from hdacc1
ahcich2: AHCI reset...
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ahcich2: SATA connect time=100us status=00000133
ahcich2: AHCI reset: device found
ahcich2: AHCI reset: device ready after 0ms
ahcich3: AHCI reset...
ahcich3: SATA connect time=1900us status=00000113
ahcich3: AHCI reset: device found
ahcich3: AHCI reset: device ready after 0ms
ahcich4: AHCI reset...
ahcich4: SATA offline status=00000004
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA offline status=00000004
ahcich5: AHCI reset: device not found
ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
GEOM: new disk ada0
ada0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1DBNSCF333310B
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x1<4K>
pass0 at ahcich2 bus 0 scbus0 target 0 lun 0
pass0: <Samsung SSD 840 EVO 250GB EXT0BB6Q> ACS-2 ATA SATA 3.x device
pass0: Serial Number S1DBNSCF333310B
pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass0: Command Queueing enabled
pass1 at ahcich3 bus 0 scbus1 target 0 lun 0
pass1: <HL-DT-ST DVD-RAM GH22LS30 1.00> Removable CD-ROM SCSI device
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass2 at ahciem0 bus 0 scbus4 target 0 lun 0
pass2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
cd0 at ahcich3 bus 0 scbus1 target 0 lun 0
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
cd0: <HL-DT-ST DVD-RAM GH22LS30 1.00> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
lapic6: CMCI unmasked
lapic4: CMCI unmasked
lapic2: CMCI unmasked
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 4 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 6 vector 48
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 2 vector 49
msi: Assigning MSI-X IRQ 257 to local APIC 2 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 49
msi: Assigning MSI-X IRQ 259 to local APIC 6 vector 49
msi: Assigning MSI IRQ 264 to local APIC 4 vector 50
msi: Assigning MSI IRQ 265 to local APIC 6 vector 50
msi: Assigning MSI IRQ 267 to local APIC 2 vector 51
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1596075413 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
GEOM: new disk cd0
Root mount waiting for: usbus0
uhub0: 24 ports with 24 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
start_init: trying /sbin/init
re0: link state changed to DOWN
re0: link state changed to UP
xl0: link state changed to DOWN
--
Public Keys:
PGP KeyID = 0x5F22FDC1
GnuPG KeyID = 0x620836CF
Mark Dixon
2016-02-13 15:46:16 UTC
Permalink
Post by Konstantin Belousov
Post by Kurt Jaeger
Can you put a dmesg.boot from the server ? An pciconf -lvb ?
As a blind shot, try to lower the CPU frequency in the BIOS, to 3 or even
to 2 Ghz. If you can try a dos (real dos from MS) on usb stick and see
if it works it could be also telling.
Also, could you obtain verbose dmesg ?
I don't think I can clock it down, although the UEFI bios screens are
massively confusing so I could be wrong.

Verbose dmesg:

Table 'FACP' at 0x866249f0
Table 'APIC' at 0x86624b00
APIC: Found table at 0x86624b00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 5: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 6: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 7: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-BETA2 #0 r295552: Fri Feb 12 01:09:31 UTC 2016
***@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
PPIM 0: PA=0xa0000, VA=0xffffffff82c10000, size=0x10000, mode=0
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff829eb000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff829ebde8.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff829ec610.
Preloaded elf obj module "/boot/kernel/linux.ko" at 0xffffffff829ecc40.
Preloaded elf obj module "/boot/kernel/linux_common.ko" at 0xffffffff829ed528.
Preloaded elf obj module "/boot/kernel/if_tap.ko" at 0xffffffff829edc58.
Preloaded elf obj module "/boot/kernel/aio.ko" at 0xffffffff829ee2c0.
Preloaded elf obj module "/boot/kernel/coretemp.ko" at 0xffffffff829ee968.
Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff829eef18.
Preloaded elf obj module "/boot/kernel/drm.ko" at 0xffffffff829ef540.
Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff829efbe8.
Preloaded elf obj module "/boot/kernel/fuse.ko" at 0xffffffff829f01d8.
Preloaded elf obj module "/boot/kernel/ng_ubt.ko" at 0xffffffff829f0880.
Preloaded elf obj module "/boot/kernel/ng_hci.ko" at 0xffffffff829f0e68.
Preloaded elf obj module "/boot/kernel/ng_bluetooth.ko" at 0xffffffff829f1490.
Preloaded elf obj module "/boot/kernel/netgraph.ko" at 0xffffffff829f1a40.
Preloaded elf obj module "/boot/kernel/if_ipheth.ko" at 0xffffffff829f20f0.
Preloaded elf obj module "/boot/kernel/uether.ko" at 0xffffffff829f2760.
Calibrating TSC clock ... TSC clock: 4008172549 Hz
CPU: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (4008.17-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,
FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,
OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,
BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,
RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,
MONITOR,PAUSE>
Secondary Processor Controls=0x1ffcff<APIC,EPT,DT,RDTSCP,x2APIC,
VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,VMCS,EPT#VE,XSAVES>
Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
Entry Controls=0xda0400
EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
TSC: P-state invariant, performance statistics
Data TLB: 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries.
Also 1GBbyte pages, 4-way, 16 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory = 68719476736 (65536 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000098fff, 561152 bytes (137 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002a39000 - 0x000000007eda6fff, 2083971072 bytes (508782 pages)
0x000000007edf2000 - 0x000000007ee36fff, 282624 bytes (69 pages)
0x000000007f948000 - 0x0000000084ed7fff, 89718784 bytes (21904 pages)
0x0000000087fff000 - 0x0000000087ffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000100b366fff, 64612626432 bytes (15774567 pages)
avail memory = 66583150592 (63498 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 5
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 6
APIC: CPU 4 has ACPI ID 3
APIC: CPU 5 has ACPI ID 7
APIC: CPU 6 has ACPI ID 4
APIC: CPU 7 has ACPI ID 8
lapic0: CMCI unmasked
XEN: CPU 0 has VCPU ID 1
XEN: CPU 1 has VCPU ID 5
XEN: CPU 2 has VCPU ID 2
XEN: CPU 3 has VCPU ID 6
XEN: CPU 4 has VCPU ID 3
XEN: CPU 5 has VCPU ID 7
XEN: CPU 6 has VCPU ID 4
XEN: CPU 7 has VCPU ID 8
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe1002984000
x86bios: EBDA 0x09c000-0x09ffff at 0xfffff8000009c000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000866010A0 0000B4 (v01 ALASKA A M I 01072009 AMI
00010013)
ACPI: FACP 0x00000000866249F0 00010C (v05 ALASKA A M I 01072009 AMI
00010013)
ACPI: DSDT 0x00000000866011E8 023806 (v02 ALASKA A M I 01072009 INTL
20120913)
ACPI: FACS 0x00000000871BCF80 000040
ACPI: APIC 0x0000000086624B00 0000BC (v03 ALASKA A M I 01072009 AMI
00010013)
ACPI: FPDT 0x0000000086624BC0 000044 (v01 ALASKA A M I 01072009 AMI
00010013)
ACPI: FIDT 0x0000000086624C08 00009C (v01 ALASKA A M I 01072009 AMI
00010013)
ACPI: MCFG 0x0000000086624CA8 00003C (v01 ALASKA A M I 01072009 MSFT
00000097)
ACPI: HPET 0x0000000086624CE8 000038 (v01 ALASKA A M I 01072009 AMI.
0005000B)
ACPI: SSDT 0x0000000086624D20 00036D (v01 SataRe SataTabl 00001000 INTL
20120913)
ACPI: LPIT 0x0000000086625090 000094 (v01 INTEL SKL 00000000 MSFT
0000005F)
ACPI: SSDT 0x0000000086625128 000248 (v02 INTEL sensrhub 00000000 INTL
20120913)
ACPI: SSDT 0x0000000086625370 002BAE (v02 INTEL PtidDevc 00001000 INTL
20120913)
ACPI: SSDT 0x0000000086627F20 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL
20120913)
ACPI: SSDT 0x0000000086628B08 00002B (v02 INTEL UsbCTabl 00001000 INTL
20120913)
ACPI: DBGP 0x0000000086628B38 000034 (v01 INTEL 00000000 MSFT
0000005F)
ACPI: DBG2 0x0000000086628B70 000054 (v00 INTEL 00000000 MSFT
0000005F)
ACPI: SSDT 0x0000000086628BC8 0006FD (v02 INTEL xh_rvp08 00000000 INTL
20120913)
ACPI: SSDT 0x00000000866292C8 0052EA (v02 SaSsdt SaSsdt 00003000 INTL
20120913)
ACPI: UEFI 0x000000008662E5B8 000042 (v01 00000000
00000000)
ACPI: SSDT 0x000000008662E600 000E58 (v02 CpuRef CpuSsdt 00003000 INTL
20120913)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-119 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
nfslock: pseudo-device
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc4b20, 0) error 19
io: <I/O>
VMBUS: load
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
hpt27xx: RocketRAID 27xx controller driver v1.2.7
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hptnr: R750/DC7280 controller driver v1.1.4
acpi0: <ALASKA A M I > on motherboard
ACPI Error: [\134_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure,
AE_NOT_FOUND (20150515/dswload-219)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150515/psobject-233)
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 24 blocks of module-level executable AML code
acpi0: Power Button (fixed)
cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8000D468800 0007AA (v02 PmRef Cpu0Ist 00003000 INTL
20120913)
cpu0: switching to generic Cx mode
cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 2
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8000D653000 0005AA (v02 PmRef ApIst 00003000 INTL
20120913)
cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 4
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 6
cpu3: <ACPI CPU> on acpi0
cpu4: Processor \134_PR_.CPU4 (ACPI ID 5) -> APIC ID 1
cpu4: <ACPI CPU> on acpi0
cpu5: Processor \134_PR_.CPU5 (ACPI ID 6) -> APIC ID 3
cpu5: <ACPI CPU> on acpi0
cpu6: Processor \134_PR_.CPU6 (ACPI ID 7) -> APIC ID 5
cpu6: <ACPI CPU> on acpi0
cpu7: Processor \134_PR_.CPU7 (ACPI ID 8) -> APIC ID 7
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0), MSI
hpet0: t2: irqs 0x00f00800 (0), MSI
hpet0: t3: irqs 0x00f01000 (0), MSI
hpet0: t4: irqs 0x00000000 (0), MSI
hpet0: t5: irqs 0x00000000 (0), MSI
hpet0: t6: irqs 0x00000000 (0), MSI
hpet0: t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 24000000 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
msi: routing MSI-X IRQ 262 to local APIC 0 vector 55
msi: routing MSI-X IRQ 263 to local APIC 0 vector 56
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment
0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xfe
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0x89800000-0xdfffffff
pcib0: decoding 3 range 0xfd000000-0xfe7fffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x191f, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1901, revid=0x07
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
secbus=1, subbus=1
found-> vendor=0x8086, dev=0xa12f, revid=0x31
domain=0, bus=0, slot=20, func=0
class=0c-03-30, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xdfb30000, size 16, enabled
pcib0: allocated type 3 (0xdfb30000-0xdfb3ffff) for rid 10 of pci0:0:20:0
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa13a, revid=0x31
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xdfb4d000, size 12, memory
disabled
pcib0: allocated type 3 (0xdfb4d000-0xdfb4dfff) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa102, revid=0x31
domain=0, bus=0, slot=23, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xdfb48000, size 13, enabled
pcib0: allocated type 3 (0xdfb48000-0xdfb49fff) for rid 10 of pci0:0:23:0
map[14]: type Memory, range 32, base 0xdfb4c000, size 8, enabled
pcib0: allocated type 3 (0xdfb4c000-0xdfb4c0ff) for rid 14 of pci0:0:23:0
map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled
pcib0: allocated type 4 (0xf050-0xf057) for rid 18 of pci0:0:23:0
map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled
pcib0: allocated type 4 (0xf040-0xf043) for rid 1c of pci0:0:23:0
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
pcib0: allocated type 4 (0xf020-0xf03f) for rid 20 of pci0:0:23:0
map[24]: type Memory, range 32, base 0xdfb4b000, size 11, enabled
pcib0: allocated type 3 (0xdfb4b000-0xdfb4b7ff) for rid 24 of pci0:0:23:0
pcib0: matched entry for 0.23.INTA
pcib0: slot 23 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0xa167, revid=0xf1
domain=0, bus=0, slot=27, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 16
secbus=2, subbus=2
found-> vendor=0x8086, dev=0xa110, revid=0xf1
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
secbus=3, subbus=3
found-> vendor=0x8086, dev=0xa112, revid=0xf1
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=4, subbus=12
found-> vendor=0x8086, dev=0xa114, revid=0xf1
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
secbus=13, subbus=13
found-> vendor=0x8086, dev=0xa116, revid=0xf1
domain=0, bus=0, slot=28, func=6
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=14, subbus=14
found-> vendor=0x8086, dev=0xa118, revid=0xf1
domain=0, bus=0, slot=29, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
secbus=15, subbus=15
found-> vendor=0x8086, dev=0xa145, revid=0x31
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xa121, revid=0x31
domain=0, bus=0, slot=31, func=2
class=05-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0xdfb44000, size 14, enabled
pcib0: allocated type 3 (0xdfb44000-0xdfb47fff) for rid 10 of pci0:0:31:2
found-> vendor=0x8086, dev=0xa170, revid=0x31
domain=0, bus=0, slot=31, func=3
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xdfb40000, size 14, enabled
pcib0: allocated type 3 (0xdfb40000-0xdfb43fff) for rid 10 of pci0:0:31:3
map[20]: type Memory, range 64, base 0xdfb20000, size 16, enabled
pcib0: allocated type 3 (0xdfb20000-0xdfb2ffff) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa123, revid=0x31
domain=0, bus=0, slot=31, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 64, base 0xdfb4a000, size 8, enabled
pcib0: allocated type 3 (0xdfb4a000-0xdfb4a0ff) for rid 10 of pci0:0:31:4
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
pcib0: allocated type 4 (0xf000-0xf01f) for rid 20 of pci0:0:31:4
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x15b8, revid=0x31
domain=0, bus=0, slot=31, func=6
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdfb00000, size 17, enabled
pcib0: allocated type 3 (0xdfb00000-0xdfb1ffff) for rid 10 of pci0:0:31:6
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
pcib0: allocated type 3 (0xde000000-0xdf0fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xc0000000-0xd1ffffff) for rid 24 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xde000000-0xdf0fffff
pcib1: prefetched decode 0xc0000000-0xd1ffffff
pcib1: special decode VGA
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x13c2, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xde000000, size 24, enabled
pcib1: allocated memory range (0xde000000-0xdeffffff) for rid 10 of pci0:1:0:0
map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size
28, enabled
pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 14 of pci0:1:0:0
map[1c]: type Prefetchable Memory, range 64, base 0xd0000000, size
25, enabled
pcib1: allocated prefetch range (0xd0000000-0xd1ffffff) for rid 1c of pci0:1:0:0
map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled
pcib1: allocated I/O port range (0xe000-0xe07f) for rid 24 of pci0:1:0:0
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x10de, dev=0x0fbb, revid=0xa1
domain=0, bus=1, slot=0, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xdf080000, size 14, enabled
pcib1: allocated memory range (0xdf080000-0xdf083fff) for rid 10 of pci0:1:0:1
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
device 0.0 on pci1
nvidia0: <GeForce GTX 970> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
vgapci0: using IRQ 264 for MSI
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0fbb) HDA Controller> mem 0xdf080000-0xdf083fff irq 17 at
device 0.1 on pci1
hdac0: PCI card vendor: 0x1043, device: 0x8508
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
hdac0: using IRQ 265 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 4, 64bit, CORB 256, RIRB 256
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdfb30000-0xdfb3ffff irq 16
at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 266 to local APIC 0 vector 61
xhci0: using IRQ 266 for MSI
xhci0: MSI enabled
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
xhci0: usbpf: Attached
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f
mem 0xdfb48000-0xdfb49fff,0xdfb4c000-0xdfb4c0ff,0xdfb4b000-0xdfb4b7ff irq 23
at device 23.0 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 62
ahci0: using IRQ 267 for MSI
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports
ahci0: Caps2: DESO SADM SDS APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps:
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps:
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib0: allocated type 3 (0xdfa00000-0xdfafffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xdfa00000-0xdfafffff
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1b21, dev=0x1242, revid=0x00
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xdfa00000, size 15, enabled
pcib3: allocated memory range (0xdfa00000-0xdfa07fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdfa00000-0xdfa07fff irq 16
at device 0.0 on pci3
xhci1: 32 bytes context size, 64-bit DMA
xhci1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 268 to local APIC 0 vector 63
xhci1: using IRQ 268 for MSI
xhci1: MSI enabled
usbus1: waiting for BIOS to give up control
usbus1 on xhci1
xhci1: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 4 (0xc000-0xdfff) for rid 1c of pcib4
pcib0: allocated type 3 (0xdf200000-0xdf7fffff) for rid 20 of pcib4
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 12
pcib4: I/O decode 0xc000-0xdfff
pcib4: memory decode 0xdf200000-0xdf7fffff
pci4: <ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
secbus=5, subbus=12
pcib4: allocated bus range (5-12) for rid 0 of pci0:4:0:0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 0.0 on pci4
pcib4: allocated I/O port range (0xc000-0xdfff) for rid 1c of pcib5
pcib4: allocated memory range (0xdf200000-0xdf7fffff) for rid 20 of pcib5
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 12
pcib5: I/O decode 0xc000-0xdfff
pcib5: memory decode 0xdf200000-0xdf7fffff
pci5: <ACPI PCI bus> on pcib5
pcib5: allocated bus range (5-5) for rid 0 of pci5
pci5: domain=0, physical bus=5
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 19
secbus=6, subbus=6
pcib5: allocated bus range (6-6) for rid 0 of pci0:5:1:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.2.INTA
pcib5: slot 2 INTA hardwired to IRQ 16
secbus=7, subbus=7
pcib5: allocated bus range (7-7) for rid 0 of pci0:5:2:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.3.INTA
pcib5: slot 3 INTA hardwired to IRQ 17
secbus=8, subbus=8
pcib5: allocated bus range (8-8) for rid 0 of pci0:5:3:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 18
secbus=9, subbus=9
pcib5: allocated bus range (9-9) for rid 0 of pci0:5:4:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.5.INTA
pcib5: slot 5 INTA hardwired to IRQ 19
secbus=10, subbus=10
pcib5: allocated bus range (10-10) for rid 0 of pci0:5:5:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.6.INTA
pcib5: slot 6 INTA hardwired to IRQ 16
secbus=11, subbus=11
pcib5: allocated bus range (11-11) for rid 0 of pci0:5:6:0
found-> vendor=0x1b21, dev=0x1187, revid=0x00
domain=0, bus=5, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: matched entry for 5.7.INTA
pcib5: slot 7 INTA hardwired to IRQ 17
secbus=12, subbus=12
pcib5: allocated bus range (12-12) for rid 0 of pci0:5:7:0
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 1.0 on pci5
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pci6: <ACPI PCI bus> on pcib6
pcib6: allocated bus range (6-6) for rid 0 of pci6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci5
pcib5: allocated memory range (0xdf200000-0xdf4fffff) for rid 20 of pcib7
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: memory decode 0xdf200000-0xdf4fffff
pci7: <ACPI PCI bus> on pcib7
pcib7: allocated bus range (7-7) for rid 0 of pci7
pci7: domain=0, physical bus=7
found-> vendor=0x14e4, dev=0x43a0, revid=0x03
domain=0, bus=7, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xdf400000, size 15, enabled
pcib7: allocated memory range (0xdf400000-0xdf407fff) for rid 10 of pci0:7:0:0
map[18]: type Memory, range 64, base 0xdf200000, size 21, enabled
pcib7: allocated memory range (0xdf200000-0xdf3fffff) for rid 18 of pci0:7:0:0
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 16
pci7: <network> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 17 at device 3.0 on pci5
pcib5: allocated I/O port range (0xd000-0xdfff) for rid 1c of pcib8
pcib5: allocated memory range (0xdf700000-0xdf7fffff) for rid 20 of pcib8
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xd000-0xdfff
pcib8: memory decode 0xdf700000-0xdf7fffff
pci8: <ACPI PCI bus> on pcib8
pcib8: allocated bus range (8-8) for rid 0 of pci8
pci8: domain=0, physical bus=8
found-> vendor=0x1b21, dev=0x0612, revid=0x02
domain=0, bus=8, slot=0, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xd050, size 3, enabled
pcib8: allocated I/O port range (0xd050-0xd057) for rid 10 of pci0:8:0:0
map[14]: type I/O Port, range 32, base 0xd040, size 2, enabled
pcib8: allocated I/O port range (0xd040-0xd043) for rid 14 of pci0:8:0:0
map[18]: type I/O Port, range 32, base 0xd030, size 3, enabled
pcib8: allocated I/O port range (0xd030-0xd037) for rid 18 of pci0:8:0:0
map[1c]: type I/O Port, range 32, base 0xd020, size 2, enabled
pcib8: allocated I/O port range (0xd020-0xd023) for rid 1c of pci0:8:0:0
map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled
pcib8: allocated I/O port range (0xd000-0xd01f) for rid 20 of pci0:8:0:0
map[24]: type Memory, range 32, base 0xdf700000, size 9, enabled
pcib8: allocated memory range (0xdf700000-0xdf7001ff) for rid 24 of pci0:8:0:0
pcib8: matched entry for 8.0.INTA
pcib8: slot 0 INTA hardwired to IRQ 17
ahci1: <ASMedia ASM1061 AHCI SATA controller> port
0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem
0xdf700000-0xdf7001ff irq 17 at device 0.0 on pci8
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 64
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: Caps: 64bit NCQ SNTF SS AL CLO 6Gbps PM PMD SSC PSC 32cmd CCC 2ports
ahci1: Caps2:
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich6: Caps: ESP
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich7: Caps: ESP
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 4.0 on pci5
pcib9: domain 0
pcib9: secondary bus 9
pcib9: subordinate bus 9
pci9: <ACPI PCI bus> on pcib9
pcib9: allocated bus range (9-9) for rid 0 of pci9
pci9: domain=0, physical bus=9
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 5.0 on pci5
pcib10: domain 0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pci10: <ACPI PCI bus> on pcib10
pcib10: allocated bus range (10-10) for rid 0 of pci10
pci10: domain=0, physical bus=10
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci5
pcib5: allocated I/O port range (0xc000-0xcfff) for rid 1c of pcib11
pcib5: allocated memory range (0xdf600000-0xdf6fffff) for rid 20 of pcib11
pcib11: domain 0
pcib11: secondary bus 11
pcib11: subordinate bus 11
pcib11: I/O decode 0xc000-0xcfff
pcib11: memory decode 0xdf600000-0xdf6fffff
pci11: <ACPI PCI bus> on pcib11
pcib11: allocated bus range (11-11) for rid 0 of pci11
pci11: domain=0, physical bus=11
found-> vendor=0x8086, dev=0x1539, revid=0x03
domain=0, bus=11, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
MSI-X supports 5 messages in map 0x1c
map[10]: type Memory, range 32, base 0xdf600000, size 17, enabled
pcib11: allocated memory range (0xdf600000-0xdf61ffff) for rid 10 of pci0:11:0:0
map[18]: type I/O Port, range 32, base 0xc000, size 5, enabled
pcib11: allocated I/O port range (0xc000-0xc01f) for rid 18 of pci0:11:0:0
map[1c]: type Memory, range 32, base 0xdf620000, size 14, enabled
pcib11: allocated memory range (0xdf620000-0xdf623fff) for rid 1c of pci0:11:0:0
pcib11: matched entry for 11.0.INTA
pcib11: slot 0 INTA hardwired to IRQ 16
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port
0xc000-0xc01f mem 0xdf600000-0xdf61ffff,0xdf620000-0xdf623fff irq 16 at
device 0.0 on pci11
igb0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 269 to local APIC 0 vector 65
msi: routing MSI-X IRQ 270 to local APIC 0 vector 66
msi: routing MSI-X IRQ 271 to local APIC 0 vector 67
igb0: using IRQs 269-271 for MSI-X
igb0: Using MSIX interrupts with 3 vectors
igb0: bpf attached
igb0: Ethernet address: 9c:5c:8e:71:89:0b
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
pcib12: <ACPI PCI-PCI bridge> irq 17 at device 7.0 on pci5
pcib12: domain 0
pcib12: secondary bus 12
pcib12: subordinate bus 12
pci12: <ACPI PCI bus> on pcib12
pcib12: allocated bus range (12-12) for rid 0 of pci12
pci12: domain=0, physical bus=12
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib0: allocated type 3 (0xdf900000-0xdf9fffff) for rid 20 of pcib13
pcib13: domain 0
pcib13: secondary bus 13
pcib13: subordinate bus 13
pcib13: memory decode 0xdf900000-0xdf9fffff
pci13: <ACPI PCI bus> on pcib13
pcib13: allocated bus range (13-13) for rid 0 of pci13
pci13: domain=0, physical bus=13
found-> vendor=0x1b21, dev=0x1242, revid=0x00
domain=0, bus=13, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xdf900000, size 15, enabled
pcib13: allocated memory range (0xdf900000-0xdf907fff) for rid 10 of pci0:13:0:0
pcib13: matched entry for 13.0.INTA
pcib13: slot 0 INTA hardwired to IRQ 16
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xdf900000-0xdf907fff irq 16
at device 0.0 on pci13
xhci2: 32 bytes context size, 64-bit DMA
xhci2: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 272 to local APIC 0 vector 68
xhci2: using IRQ 272 for MSI
xhci2: MSI enabled
usbus2: waiting for BIOS to give up control
usbus2 on xhci2
xhci2: usbpf: Attached
pcib14: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pcib0: allocated type 3 (0xdf800000-0xdf8fffff) for rid 20 of pcib14
pcib14: domain 0
pcib14: secondary bus 14
pcib14: subordinate bus 14
pcib14: memory decode 0xdf800000-0xdf8fffff
pci14: <ACPI PCI bus> on pcib14
pcib14: allocated bus range (14-14) for rid 0 of pci14
pci14: domain=0, physical bus=14
found-> vendor=0x1b21, dev=0x1242, revid=0x00
domain=0, bus=14, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xdf800000, size 15, enabled
pcib14: allocated memory range (0xdf800000-0xdf807fff) for rid 10 of pci0:14:0:0
pcib14: matched entry for 14.0.INTA
pcib14: slot 0 INTA hardwired to IRQ 18
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xdf800000-0xdf807fff irq 18
at device 0.0 on pci14
xhci3: 32 bytes context size, 64-bit DMA
xhci3: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 273 to local APIC 0 vector 69
xhci3: using IRQ 273 for MSI
xhci3: MSI enabled
usbus3: waiting for BIOS to give up control
usbus3 on xhci3
xhci3: usbpf: Attached
pcib15: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pcib15: domain 0
pcib15: secondary bus 15
pcib15: subordinate bus 15
pci15: <ACPI PCI bus> on pcib15
pcib15: allocated bus range (15-15) for rid 0 of pci15
pci15: domain=0, physical bus=15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac1: <Intel (0xa170) HDA Controller> mem
0xdfb40000-0xdfb43fff,0xdfb20000-0xdfb2ffff irq 16 at device 31.3 on pci0
hdac1: PCI card vendor: 0x1043, device: 0x868f
hdac1: HDA Driver Revision: 20120126_0002
hdac1: Config options: on=0x00000000 off=0x00000000
hdac1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 274 to local APIC 0 vector 70
hdac1: using IRQ 274 for MSI
hdac1: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
pci0: <network, ethernet> at device 31.6 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ACPI: Enabled 6 GPEs in block 00 to 7F
acpi0: wakeup code va 0xfffffe1044ba7000 pa 0x90000
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0 failed to probe on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: RESET_KBD return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 71
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=100
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=100
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp4: Setting TjMax=100
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp5: Setting TjMax=100
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp6: Setting TjMax=100
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp7: Setting TjMax=100
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Device configuration finished.
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
procfs registered
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lapic: Divisor 2, Frequency 12000518 Hz
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x339 offMax=0x487
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 524288
lo0: bpf attached
hpt27xx: no controller detected.
hptrr: no controller detected.
hptnr: no controller detected.
hdacc0: <NVIDIA (0x0071) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0071) Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x10438508
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 6 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 7 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 4 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 6 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 7 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: 4 associations found:
hdaa0: Association 0 (15) out:
hdaa0: Pin nid=4 seq=0
hdaa0: Association 1 (15) out:
hdaa0: Pin nid=5 seq=0
hdaa0: Association 2 (15) out:
hdaa0: Pin nid=6 seq=0
hdaa0: Association 3 (15) out:
hdaa0: Pin nid=7 seq=0
hdaa0: Tracing association 0 (15)
hdaa0: Pin 4 traced to DAC 8
hdaa0: Association 0 (15) trace succeeded
hdaa0: Tracing association 1 (15)
hdaa0: Pin 5 traced to DAC 9
hdaa0: Association 1 (15) trace succeeded
hdaa0: Tracing association 2 (15)
hdaa0: Pin 6 traced to DAC 10
hdaa0: Association 2 (15) trace succeeded
hdaa0: Tracing association 3 (15)
hdaa0: Pin 7 traced to DAC 11
hdaa0: Association 3 (15) trace succeeded
hdaa0: Looking for additional DAC for association 0 (15)
hdaa0: Looking for additional DAC for association 1 (15)
hdaa0: Looking for additional DAC for association 2 (15)
hdaa0: Looking for additional DAC for association 3 (15)
hdaa0: Tracing input monitor
hdaa0: Tracing other input monitors
hdaa0: Tracing beeper
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000005 AC3 PCM
pcm0: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm0: DAC: 8
pcm0:
pcm0: nid=4 [pin: Digital-out (Jack)]
pcm0: + <- nid=8 [audio output] [src: pcm]
pcm0:
pcm0: Mixer "vol" -> "none": child=0x00000010
pcm0: Mixer "pcm": parent="vol"
pcm0: Soft PCM mixer ENABLED
pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: Playback:
pcm1: Stream cap: 0x00000005 AC3 PCM
pcm1: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm1: DAC: 9
pcm1:
pcm1: nid=5 [pin: Digital-out (Jack)]
pcm1: + <- nid=9 [audio output] [src: pcm]
pcm1:
pcm1: Mixer "vol" -> "none": child=0x00000010
pcm1: Mixer "pcm": parent="vol"
pcm1: Soft PCM mixer ENABLED
pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm2: Playback:
pcm2: Stream cap: 0x00000005 AC3 PCM
pcm2: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm2: DAC: 10
pcm2:
pcm2: nid=6 [pin: Digital-out (Jack)]
pcm2: + <- nid=10 [audio output] [src: pcm]
pcm2:
pcm2: Mixer "vol" -> "none": child=0x00000010
pcm2: Mixer "pcm": parent="vol"
pcm2: Soft PCM mixer ENABLED
pcm2: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> at nid 7 on hdaa0
pcm3: Playback:
pcm3: Stream cap: 0x00000005 AC3 PCM
pcm3: PCM cap: 0x000e07f0 16 20 24 bits, 32 44 48 88 96 176 192 KHz
pcm3: DAC: 11
pcm3:
pcm3: nid=7 [pin: Digital-out (Jack)]
pcm3: + <- nid=11 [audio output] [src: pcm]
pcm3:
pcm3: Mixer "vol" -> "none": child=0x00000010
pcm3: Mixer "pcm": parent="vol"
pcm3: Soft PCM mixer ENABLED
pcm3: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
hdacc1: <Realtek (0x0900) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0900) Audio Function Group> at nid 1 on hdacc1
hdaa1: Subsystem ID: 0x1043868f
hdaa1: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa1: GPIO0: disabled
hdaa1: GPIO1: disabled
hdaa1: Original pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 17 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa1: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa1: 21 01011012 1 2 Line-out Jack 1/8 Rear Black 0
hdaa1: 22 01016011 1 1 Line-out Jack 1/8 Rear Orange 0
hdaa1: 23 01012014 1 4 Line-out Jack 1/8 Rear Grey 0
hdaa1: 24 01a19050 5 0 Mic Jack 1/8 Rear Pink 0
hdaa1: 25 02a19060 6 0 Mic Jack 1/8 Front Pink 0
hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0
hdaa1: 27 02214020 2 0 Headphones Jack 1/8 Front Green 0
hdaa1: 30 01456140 4 0 SPDIF-out Jack Optical Rear Orange 1
hdaa1: Patching widget caps nid=29 0x00f00000 -> 0x00700000
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 17 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa1: 20 01014010 1 0 Line-out Jack 1/8 Rear Green 0
hdaa1: 21 01011012 1 2 Line-out Jack 1/8 Rear Black 0
hdaa1: 22 01016011 1 1 Line-out Jack 1/8 Rear Orange 0
hdaa1: 23 01012014 1 4 Line-out Jack 1/8 Rear Grey 0
hdaa1: 24 01a19050 5 0 Mic Jack 1/8 Rear Pink 0
hdaa1: 25 02a19060 6 0 Mic Jack 1/8 Front Pink 0
hdaa1: 26 0181305f 5 15 Line-in Jack 1/8 Rear Blue 0
hdaa1: 27 02214020 2 0 Headphones Jack 1/8 Front Green 0
hdaa1: 30 01456140 4 0 SPDIF-out Jack Optical Rear Orange 1
hdaa1: 6 associations found:
hdaa1: Association 0 (1) out:
hdaa1: Pin nid=20 seq=0
hdaa1: Pin nid=22 seq=1
hdaa1: Pin nid=21 seq=2
hdaa1: Pin nid=23 seq=4
hdaa1: Association 1 (2) out:
hdaa1: Pin nid=27 seq=0
hdaa1: Association 2 (3) out:
hdaa1: Pin nid=17 seq=0
hdaa1: Association 3 (4) out:
hdaa1: Pin nid=30 seq=0
hdaa1: Association 4 (5) in:
hdaa1: Pin nid=24 seq=0
hdaa1: Pin nid=26 seq=15
hdaa1: Association 5 (6) in:
hdaa1: Pin nid=25 seq=0
hdaa1: Tracing association 0 (1)
hdaa1: Pin 20 traced to DAC 2
hdaa1: Pin 22 traced to DAC 4
hdaa1: Pin 21 traced to DAC 3
hdaa1: Pin 23 traced to DAC 5
hdaa1: Association 0 (1) trace succeeded
hdaa1: Tracing association 1 (2)
hdaa1: Pin 27 traced to DAC 37
hdaa1: Association 1 (2) trace succeeded
hdaa1: Tracing association 2 (3)
hdaa1: Pin 17 traced to DAC 16
hdaa1: Association 2 (3) trace succeeded
hdaa1: Tracing association 3 (4)
hdaa1: Pin 30 traced to DAC 6
hdaa1: Association 3 (4) trace succeeded
hdaa1: Tracing association 4 (5)
hdaa1: Pin 24 traced to ADC 8
hdaa1: Pin 26 traced to ADC 8
hdaa1: Association 4 (5) trace succeeded
hdaa1: Tracing association 5 (6)
hdaa1: Pin 25 traced to ADC 9
hdaa1: Association 5 (6) trace succeeded
hdaa1: Looking for additional DAC for association 0 (1)
hdaa1: Looking for additional DAC for association 1 (2)
hdaa1: Looking for additional DAC for association 2 (3)
hdaa1: Looking for additional DAC for association 3 (4)
hdaa1: Looking for additional ADC for association 4 (5)
hdaa1: Looking for additional ADC for association 5 (6)
hdaa1: Tracing input monitor
hdaa1: Tracing nid 11 to out
hdaa1: nid 11 is input monitor
hdaa1: Tracing nid 34 to out
hdaa1: Tracing nid 35 to out
hdaa1: Tracing other input monitors
hdaa1: Tracing nid 24 to out
hdaa1: Tracing nid 25 to out
hdaa1: Tracing nid 26 to out
hdaa1: Tracing beeper
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm4: <Realtek (0x0900) (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26
on hdaa1
pcm4: Playback:
pcm4: Stream cap: 0x00000001 PCM
pcm4: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm4: DAC: 2 4 3 5
pcm4:
pcm4: nid=20 [pin: Line-out (Green Jack)]
pcm4: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm4: + <- nid=2 [audio output] [src: pcm]
pcm4: + <- nid=11 [audio mixer] [src: mix]
pcm4:
pcm4: nid=22 [pin: Line-out (Orange Jack)]
pcm4: + <- nid=14 [audio mixer] [src: pcm, mix]
pcm4: + <- nid=4 [audio output] [src: pcm]
pcm4: + <- nid=11 [audio mixer] [src: mix]
pcm4:
pcm4: nid=21 [pin: Line-out (Black Jack)]
pcm4: + <- nid=13 [audio mixer] [src: pcm, mix]
pcm4: + <- nid=3 [audio output] [src: pcm]
pcm4: + <- nid=11 [audio mixer] [src: mix]
pcm4:
pcm4: nid=23 [pin: Line-out (Grey Jack)]
pcm4: + <- nid=15 [audio mixer] [src: pcm, mix]
pcm4: + <- nid=5 [audio output] [src: pcm]
pcm4: + <- nid=11 [audio mixer] [src: mix]
pcm4:
pcm4: Record:
pcm4: Stream cap: 0x00000001 PCM
pcm4: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm4: ADC: 8
pcm4:
pcm4: nid=8 [audio input]
pcm4: + <- nid=35 [audio mixer] [src: line, mic, mix]
pcm4: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm4: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm4: + <- nid=11 [audio mixer] [src: mix]
pcm4:
pcm4: Input Mix:
pcm4:
pcm4: nid=11 [audio mixer]
pcm4: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm4: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm4:
pcm4: Master Volume (OSS: vol): -65/0dB
pcm4: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm4: +- ctl 2 (nid 3 out): -65/0dB (88 steps)
pcm4: +- ctl 3 (nid 4 out): -65/0dB (88 steps)
pcm4: +- ctl 4 (nid 5 out): -65/0dB (88 steps)
pcm4: +- ctl 15 (nid 12 in 0): mute
pcm4: +- ctl 16 (nid 12 in 1): mute
pcm4: +- ctl 17 (nid 13 in 0): mute
pcm4: +- ctl 18 (nid 13 in 1): mute
pcm4: +- ctl 19 (nid 14 in 0): mute
pcm4: +- ctl 20 (nid 14 in 1): mute
pcm4: +- ctl 21 (nid 15 in 0): mute
pcm4: +- ctl 22 (nid 15 in 1): mute
pcm4: +- ctl 23 (nid 20 in ): mute
pcm4: +- ctl 24 (nid 21 in ): mute
pcm4: +- ctl 25 (nid 22 in ): mute
pcm4: +- ctl 26 (nid 23 in ): mute
pcm4:
pcm4: PCM Volume (OSS: pcm): -65/0dB
pcm4: +- ctl 1 (nid 2 out): -65/0dB (88 steps)
pcm4: +- ctl 2 (nid 3 out): -65/0dB (88 steps)
pcm4: +- ctl 3 (nid 4 out): -65/0dB (88 steps)
pcm4: +- ctl 4 (nid 5 out): -65/0dB (88 steps)
pcm4: +- ctl 15 (nid 12 in 0): mute
pcm4: +- ctl 17 (nid 13 in 0): mute
pcm4: +- ctl 19 (nid 14 in 0): mute
pcm4: +- ctl 21 (nid 15 in 0): mute
pcm4:
pcm4: Microphone Volume (OSS: mic): 0/30dB
pcm4: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm4: +- ctl 28 (nid 24 out): 0/30dB (4 steps)
pcm4: +- ctl 44 (nid 35 in 0): mute
pcm4:
pcm4: Line-in Volume (OSS: line): 0/30dB
pcm4: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm4: +- ctl 32 (nid 26 out): 0/30dB (4 steps)
pcm4: +- ctl 46 (nid 35 in 2): mute
pcm4:
pcm4: Recording Level (OSS: rec): -17/30dB
pcm4: +- ctl 5 (nid 8 in 0): -17/30dB (64 steps) + mute
pcm4: +- ctl 44 (nid 35 in 0): mute
pcm4: +- ctl 46 (nid 35 in 2): mute
pcm4: +- ctl 52 (nid 35 in 8): mute
pcm4:
pcm4: Input Mix Level (OSS: mix): -34/12dB
pcm4: +- ctl 7 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm4: +- ctl 9 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm4: +- ctl 16 (nid 12 in 1): mute
pcm4: +- ctl 18 (nid 13 in 1): mute
pcm4: +- ctl 20 (nid 14 in 1): mute
pcm4: +- ctl 22 (nid 15 in 1): mute
pcm4: +- ctl 52 (nid 35 in 8): mute
pcm4:
pcm4: Input Monitoring Level (OSS: igain): 0/0dB
pcm4: +- ctl 16 (nid 12 in 1): mute
pcm4: +- ctl 18 (nid 13 in 1): mute
pcm4: +- ctl 20 (nid 14 in 1): mute
pcm4: +- ctl 22 (nid 15 in 1): mute
pcm4:
pcm4: Mixer "vol":
pcm4: Mixer "pcm":
pcm4: Mixer "line":
pcm4: Mixer "mic":
pcm4: Mixer "mix":
pcm4: Mixer "rec":
pcm4: Mixer "igain":
pcm4: Mixer "ogain":
pcm4: Playback channel set is: Front Left, Front Right, Front Center, Low
Frequency Effects, Back Left, Back Right, Side Left, Side Right,
pcm4: Playback channel matrix is: 7.1 (disconnected)
pcm4: Recording channel set is: Front Left, Front Right,
pcm4: Recording channel matrix is: 2.0 (disconnected)
pcm5: <Realtek (0x0900) (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: Playback:
pcm5: Stream cap: 0x00000001 PCM
pcm5: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm5: DAC: 37
pcm5:
pcm5: nid=27 [pin: Headphones (Green Jack)]
pcm5: + <- nid=38 [audio mixer] [src: pcm, mix]
pcm5: + <- nid=37 [audio output] [src: pcm]
pcm5: + <- nid=11 [audio mixer] [src: mix]
pcm5:
pcm5: Record:
pcm5: Stream cap: 0x00000001 PCM
pcm5: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm5: ADC: 9
pcm5:
pcm5: nid=9 [audio input]
pcm5: + <- nid=34 [audio mixer] [src: monitor]
pcm5: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor]
pcm5:
pcm5: Master Volume (OSS: vol): -65/0dB
pcm5: +- ctl 33 (nid 27 in ): mute
pcm5: +- ctl 53 (nid 37 out): -65/0dB (88 steps)
pcm5: +- ctl 54 (nid 38 in 0): mute
pcm5: +- ctl 55 (nid 38 in 1): mute
pcm5:
pcm5: PCM Volume (OSS: pcm): -65/0dB
pcm5: +- ctl 53 (nid 37 out): -65/0dB (88 steps)
pcm5: +- ctl 54 (nid 38 in 0): mute
pcm5:
pcm5: Microphone2 Volume (OSS: monitor): 0/30dB
pcm5: +- ctl 6 (nid 9 in 0): -17/30dB (64 steps) + mute
pcm5: +- ctl 30 (nid 25 out): 0/30dB (4 steps)
pcm5: +- ctl 36 (nid 34 in 1): mute
pcm5:
pcm5: Recording Level (OSS: rec): -17/30dB
pcm5: +- ctl 6 (nid 9 in 0): -17/30dB (64 steps) + mute
pcm5: +- ctl 30 (nid 25 out): 0/30dB (4 steps)
pcm5: +- ctl 36 (nid 34 in 1): mute
pcm5:
pcm5: Input Mix Level (OSS: mix)
pcm5: +- ctl 55 (nid 38 in 1): mute
pcm5:
pcm5: Input Monitoring Level (OSS: igain): 0/0dB
pcm5: +- ctl 55 (nid 38 in 1): mute
pcm5:
pcm5: Mixer "vol":
pcm5: Mixer "pcm":
pcm5: Mixer "rec":
pcm5: Mixer "igain":
pcm5: Mixer "ogain":
pcm5: Mixer "monitor":
pcm5: Playback channel set is: Front Left, Front Right,
pcm5: Playback channel matrix is: 2.0 (disconnected)
pcm5: Recording channel set is: Front Left, Front Right,
pcm5: Recording channel matrix is: 2.0 (disconnected)
pcm6: <Realtek (0x0900) (Onboard Digital)> at nid 17 on hdaa1
pcm6: Playback:
pcm6: Stream cap: 0x00000005 AC3 PCM
pcm6: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm6: DAC: 16
pcm6:
pcm6: nid=17 [pin: SPDIF-out (Fixed)]
pcm6: + <- nid=16 [audio output] [src: pcm]
pcm6:
pcm6: Mixer "vol" -> "none": child=0x00000010
pcm6: Mixer "pcm": parent="vol"
pcm6: Soft PCM mixer ENABLED
pcm6: Playback channel set is: Front Left, Front Right,
pcm6: Playback channel matrix is: 2.0 (unknown)
pcm7: <Realtek (0x0900) (Rear Digital)> at nid 30 on hdaa1
pcm7: Playback:
pcm7: Stream cap: 0x00000005 AC3 PCM
pcm7: PCM cap: 0x000e05f0 16 20 24 bits, 32 44 48 88 96 192 KHz
pcm7: DAC: 6
pcm7:
pcm7: nid=30 [pin: SPDIF-out (Orange Jack)]
pcm7: + <- nid=6 [audio output] [src: pcm]
pcm7:
pcm7: Mixer "vol" -> "none": child=0x00000010
pcm7: Mixer "pcm": parent="vol"
pcm7: Soft PCM mixer ENABLED
pcm7: Playback channel set is: Front Left, Front Right,
pcm7: Playback channel matrix is: 2.0 (unknown)
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 5.0Gbps Super Speed USB v3.0
ahcich0: AHCI reset...
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b21> at usbus1
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1b21> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen3.1: <0x1b21> at usbus3
uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
ahcich0: SATA offline status=00000004
ahcich0: AHCI reset: device not found
ahcich1: AHCI reset...
ahcich1: SATA offline status=00000004
ahcich1: AHCI reset: device not found
ahcich2: AHCI reset...
ahcich2: SATA connect time=1900us status=00000113
ahcich2: AHCI reset: device found
ahcich2: AHCI reset: device ready after 0ms
ahcich3: AHCI reset...
ahcich3: SATA connect time=1000us status=00000123
ahcich3: AHCI reset: device found
ahcich4: AHCI reset...
ahcich4: SATA connect time=100us status=00000133
ahcich4: AHCI reset: device found
ahcich5: AHCI reset...
ahcich5: SATA connect time=1700us status=00000123
ahcich5: AHCI reset: device found
ahcich6: AHCI reset...
ahcich6: SATA connect time=100us status=00000133
ahcich6: AHCI reset: device found
ahcich6: AHCI reset: device ready after 0ms
ahcich7: AHCI reset...
ahcich7: SATA connect time=100us status=00000133
ahcich7: AHCI reset: device found
ahcich3: AHCI reset: device ready after 100ms
uhub1: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ahcich4: AHCI reset: device ready after 100ms
ahcich5: AHCI reset: device ready after 100ms
ahcich7: AHCI reset: device ready after 100ms
pass0 at ahcich2 bus 0 scbus2 target 0 lun 0
pass0: <TSSTcorp CDDVDW SH-222AB SB01> Removable CD-ROM SCSI device
pass0: Serial Number R8BZ68DB840995
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
pass1 at ahcich3 bus 0 scbus3 target 0 lun 0
pass1: <WDC WD5000AAVS-00ZTB0 01.01B01> ATA8-ACS SATA 2.x device
pass1: Serial Number WD-WMASU0754532
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
pass2: <ST2000NM0033-9ZM175 SN04> ACS-2 ATA SATA 3.x device
pass2: Serial Number Z1X3S5XD
pass2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
pass3 at ahcich5 bus 0 scbus5 target 0 lun 0
pass3: <Hitachi HDP725050GLA360 GM4OA52A> ATA8-ACS SATA 2.x device
pass3: Serial Number GEA530RE1L82SA
pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
pass4 at ahciem0 bus 0 scbus6 target 0 lun 0
pass4: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
pass5 at ahcich6 bus 0 scbus7 target 0 lun 0
pass5: <Samsung SSD 850 PRO 128GB EXM01B6Q> ACS-2 ATA SATA 3.x device
pass5: Serial Number S1SMNSAFC21908L
pass5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
pass5: Command Queueing enabled
pass6 at ahcich7 bus 0 scbus8 target 0 lun 0
pass6: <ST2000VN000-1H3164 SC41> ACS-2 ATA SATA 3.x device
pass6: Serial Number W1H1K74S
pass6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
pass6: Command Queueing enabled
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD5000AAVS-00ZTB0 01.01B01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WMASU0754532
ada0: 300.000MB/s transfersGEOM: new disk ada0
(SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada0: Previously was known as ad10
ada1 at ahcich4 bus 0 scbus4 target 0 lun 0
ada1: <ST2000NM0033-9ZM175 SN04> ACS-2 ATA SATA 3.x device
ada1: Serial Number Z1X3S5XD
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: Previously was known as ad12
ada2 at ahcich5 bus 0 scbus5 target 0 lun 0
ada2: <Hitachi HDP725050GLA360 GM4OA52A> ATA8-ACS SATA 2.x device
ada2: Serial Number GEA530RE1L82SA
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors)
ada2: Previously was known as ad14
ada3 at ahcich6 bus 0 scbus7 target 0 lun 0
ada3: <Samsung SSD 850 PRO 128GB EXM01B6Q> ACS-2 ATA SATA 3.x device
ada3: Serial Number S1SMNSAFC21908L
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada3: Command Queueing enabled
ada3: 122104MB (250069680 512 byte sectors)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad16
ada4 at ahcich7 bus 0 scbus8 target 0 lun 0
ada4: <ST2000VN000-1H3164 SC41> ACS-2 ATA SATA 3.x device
ada4: Serial Number W1H1K74S
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors)
ada4: Previously was known as ad18
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
cd0: <TSSTcorp CDDVDW SH-222AB SB01> Removable CD-ROM SCSI device
cd0: Serial Number R8BZ68DB840995
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
ugen3.2: <Metadot - Das Keyboard> at usbus3
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
GEOM: new disk ada4
ukbd0: <Metadot - Das Keyboard> on usbus3
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhub0: 26 ports with 26 removable, self powered
Netvsc initializing... done!
lapic5: CMCI unmasked
lapic6: CMCI unmasked
lapic7: CMCI unmasked
lapic4: CMCI unmasked
lapic3: CMCI unmasked
lapic2: CMCI unmasked
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000100f2
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x000000f2
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 3 vector 48
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49
msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 48
msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 48
msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 48
msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48
msi: Assigning MSI IRQ 264 to local APIC 4 vector 49
msi: Assigning MSI IRQ 265 to local APIC 5 vector 49
msi: Assigning MSI IRQ 266 to local APIC 6 vector 49
msi: Assigning MSI IRQ 267 to local APIC 7 vector 49
msi: Assigning MSI-X IRQ 270 to local APIC 1 vector 50
msi: Assigning MSI-X IRQ 271 to local APIC 1 vector 51
msi: Assigning MSI IRQ 272 to local APIC 2 vector 50
msi: Assigning MSI IRQ 273 to local APIC 3 vector 50
msi: Assigning MSI IRQ 274 to local APIC 4 vector 50
GEOM: new disk cd0
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 2004086274 Hz quality 1000
GEOM_PART: partition 1 on (ada4, GPT) is not aligned on 4096 bytes
GEOM_PART: partition 1 on (diskid/DISK-W1H1K74S, GPT) is not aligned on 4096
bytes
Root mount waiting for: usbus3 usbus0
ugen3.3: <vendor 0x0409> at usbus3
uhub4: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on
usbus3
ugen0.2: <SMSC> at usbus0
uhub5: <SMSC USB2134B, class 9/0, rev 2.10/60.80, addr 1> on usbus0
uhub5: MTT enabled
uhub4: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen0.3: <Microsoft> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Broadcom Corp> at usbus0
Trying to mount root from zfs:zroot2 []...
start_init: trying /sbin/init
linprocfs registered
uhid0: <Metadot - Das Keyboard Das Keyboard Model S, class 0/0, rev
1.10/1.00, addr 1> on usbus3
ums0: <Microsoft Microsoft SideWinder X3 Mouse, class 0/0, rev 2.00/4.30,
addr 2> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=26
igb0: Link is up 1000 Mbps Full Duplex, Flow Control: Full
igb0: link state changed to UP
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
hdaa0: Pin sense: nid=5 sense=0x80000000 (connected)
pcm1: Playback channel matrix is: unknown, assuming 7.1 (connected)
hdaa0: Pin sense: nid=5 sense=0xc0000000 (connected, ELD valid)
hdaa0: ELD nid=5: ELD_Ver=2 Baseline_ELD_Len=8
hdaa0: ELD nid=5: CEA_EDID_Ver=3 MNL=13
hdaa0: ELD nid=5: SAD_Count=1 Conn_Type=1 S_AI=0 HDCP=0
hdaa0: ELD nid=5: Aud_Synch_Delay=0ms
hdaa0: ELD nid=5: Channels=0x1<FLR>
hdaa0: ELD nid=5: Port_ID=0x0004000000000000
hdaa0: ELD nid=5: Manufacturer_Name=0x10ac
hdaa0: ELD nid=5: Product_Code=0xbd40
hdaa0: ELD nid=5: Monitor_Name_String='DELL P2715Q
'
hdaa0: ELD nid=5: LPCM 2ch freqs=0x1f<96,88,48,44,32> sizes=0x7<24,20,16>
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (connected)
Konstantin Belousov
2016-02-13 17:02:39 UTC
Permalink
Post by Mark Dixon
I don't think I can clock it down, although the UEFI bios screens are
massively confusing so I could be wrong.
Might be, try the following (mostly debugging) change.

diff --git a/sys/boot/i386/libi386/time.c b/sys/boot/i386/libi386/time.c
index c27dcf6..592d64a 100644
--- a/sys/boot/i386/libi386/time.c
+++ b/sys/boot/i386/libi386/time.c
@@ -97,8 +97,8 @@ time(time_t *t)
* Resolution of this function is variable, but typically around
* 1ms.
*/
-void
-delay(int period)
+static void
+delay_bios(int period)
{
v86.ctl = 0;
v86.addr = 0x15; /* int 0x15, function 0x86 */
@@ -107,3 +107,53 @@ delay(int period)
v86.edx = period & 0xffff;
v86int();
}
+
+static uint64_t rd;
+
+static __inline uint64_t
+rdtsc(void)
+{
+ uint64_t rv;
+
+ __asm __volatile("rdtsc" : "=A" (rv));
+ return (rv);
+}
+
+static void
+delay_rdtsc_calibrate(void)
+{
+ int x1, x2;
+ uint64_t s, f;
+
+ for (x1 = bios_seconds(); x1 == (x2 = bios_seconds());)
+ ;
+ s = rdtsc();
+ for (; x2 == (x1 = bios_seconds());)
+ ;
+ f = rdtsc();
+ rd = f - s;
+ printf("rd %llx\n", rd);
+}
+
+static void
+delay_rdtsc(int period)
+{
+ uint64_t x;
+
+ x = rdtsc() + rd / 1000000;
+ while (rdtsc() < x)
+ ;
+}
+
+void
+delay(int period)
+{
+
+ if (0) {
+ delay_bios(period);
+ } else {
+ if (rd == 0)
+ delay_rdtsc_calibrate();
+ delay_rdtsc(period);
+ }
+}
Mark Dixon
2016-02-14 21:42:24 UTC
Permalink
Post by Konstantin Belousov
Might be, try the following (mostly debugging) change.
Tried it, the only thing I saw different is after the menu I got:

rd eef611d6

Hope that helps,

Mark
Konstantin Belousov
2016-02-15 09:44:28 UTC
Permalink
Post by Mark Dixon
Post by Konstantin Belousov
Might be, try the following (mostly debugging) change.
rd eef611d6
The value is reasonable.

The fact that the patch did not worked means that my guess about
malfunctioning bios pause was not correct. I do not have any other out
of thin air ideas what else could be wrong, right now, the system must
be investigated to diagnose the issue.

Thank you for the testing.

Loading...